How do I open my Rabbit wine opener?

How do you open a rabbit electric wine opener?

Simply place the corkscrew on top of your favorite bottle and it will automatically removes and ejects the cork – no buttons necessary. Rechargeable, a single charge opens 30+ bottles of wine. This is the easiest corkscrew you’ll ever use.

How do you use the rabbit wine stopper?

To use, insert the Push Button Stopper into the wine bottle. firmly. Pump out air by simply pulling handle up and down repeatedly. Vacuum Pump preserves the flavor of the wine until bottle is re-opened.

How do I change the battery in my Rabbit wine opener?

1 Open the battery compartment cover and insert four “AA” batteries (included) matching the “+” and “-” marks on the battery and compartment. Replace the cover. 2 Remove the metal foil from the top of the wine bottle using foil cutter provided. 3 Place the electric wine opener on top of the wine bottle.

How do you charge a Rabbit wine opener?

When charging, always plug DC cord into unit first, then plug AC cord into electrical outlet. To disconnect, remove the AC cord first then the DC power cord. Always unplug the unit before taking off parts or attachments. WARNING: Electric Wine Opener corkscrew is sharp.

THIS IS FUN:  Quick Answer: How much of light beer is water?

How do you remove a vacuum plug from a wine bottle?

To remove the FoodSaver® Bottle Stopper, simply twist and pull up on the bottle stopper to release the vacuum.

How do you clean the vacuum on a wine stopper?

You can clean it with a damp cloth and dishwashing soap. Let the pump dry and apply a little Vaseline (or similar grease) on the inside of the pump and the pump works just fine again. Please note: never put your pump in the dishwasher or submerge it in water!

How do you open a wine bottle that won’t open?

Sometimes a simple trick is all you need: Try putting the neck of the wine bottle under very hot running water for about 30 seconds. The heat will get the glass to expand, and in some cases, this is enough to loosen the cork to extract it.

How do I change the batteries in my rabbit?

The battery compartment is located inside Vibrating Rabbit’s lower pouch opening. Remove the Velcro attached vibration unit. Next slide the battery cover off and install 2 AA batteries paying close attention to proper battery polarity. Replace the battery compartment cover.

How do I fix my electric wine opener?

Remove the screws and the wine opener will be in halves. you can unscrew the cork from the wine opener and while you have it apart, slide the contacts for charging down or bend them a little with a pliers. If you re-assemble the wine opener, it might charge and work again.